FrSky Archer Plus SR12 Receiver With Stabiliser

Overview:

The Archer Plus SR12 are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer and feature multiple flight modes (Auto-level, Stabilization, Knife-Edge, etc.) and configuration methods. The SR12+ receivers have 12 configurable channel ports*, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port.

The SR12+ supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The SR12+ can be used as a Primary receiver in a redundant solution by setting a port as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.

The SR12+ also provides a socket that can be used to connect a switch panel to enable the built-in Power Switch function. It uses a set of standard XT30 plugs which also provides a safe and efficient way to provide power. By utilizing together with current overload wires on the channel ports, the connected device can be safeguarded.

* Some features require the support of ACCESS and ETHOS.

** 4in1 / Multiprotocol - supported only with firmware 1.3.3.29 and above **

Features:
- Enhanced Anti RF-Interference capability with more solid RF performance
- Smart-matched ACCESS & ACCST V2 (EU LBT & FCC) modes
- Supports basic Black-Box function
- Built-in Power Switch Function | Match with Different External Switches (Optional extra - not included)
- Built-in 3-axis gyroscope and 3-axis accelerometer sensor
- Multiple flight modes and configuration tools (ETHOS, LUA scripts, etc.)
- 12 configurable channel ports* (PWM, SBUS, FBUS, or S.Port)
- (Note: In ACCST mode, SBUS Out is assigned on Pin11 & S.Port is on Pin12.)
- Supports signal redundancy (SBUS In)
- Full control range with telemetry (S.Port or FBUS)
- Anti-interference capability in the spark-ignition process
- Over-The-Air (OTA) FW update*
- External battery/device voltage detection

Specifications:
- Dimension: 48.5×33×17.9mm (L×W×H)
- Weight: 21.5g
- Operating Voltage Range: 3.5 -10V (Recommend 2S Li-Batteries)
- Operating Current: ＜115mA@5V
- Continuous Current: ≤20A (power the device) ｜ Instaneous Current: ≤40A (power the device)
- Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)
- Antenna connector: IPEX1
- Dual XT30 Power Input Connector
- Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
- 12 Configurable Channel Ports (ACCESS mode)
- CP1: PWM / SBUS Out / FBUS / S.Port / SBUS In
- CP2-12: PWM / SBUS Out / FBUS / S.Port
- SBUS Out (Supports 16CH / 24CH mode)

Includes:
- 1x FrSky Archer Plus SR12+ ACCESS/ACCST (EU LBT & FCC) Receiver