GNB 3300mAh 2S 5C LiPo Battery For Sanwa Transmitters

Overview:

The GNB 3300mAh 2S 5C LiPo Battery For Sanwa MT-4, M11X M12 transmitters Exzes-X, Aquila-6, SD-10G is a high quality LiPo battery manufacturered by Gaoneng, more commonly known as GNB. It features a maximum discharge rating of 5C. The battery is fitted with an JR connector and JST XH2.54 balance connector.

This GNB battery is 2S rated and is ideal for powering the Sanwa transmitter. Note, this is its intended purpose, its not designed to be used for powering models etc - its a reasonably high resistance, low c rating battery.

Specifications:

- Model: GNB 3300mAh 2S 5C LiPo Battery with JR and XH2.54 (3 pin) balance connector
- Weight: ~107g +-5%
- Dimensions: ~95x30x18mm (without wires and connectors)
- Connector Type: JR and JST XH2.54 (3 pin) balance connector
- Cells: 2S 1P / 7.4V (LiPo)
- Rating: 5C Continuous  (We would suggest its intended for 0.5C maximum)

*** PLEASE NOTE: THIS ITEM CAN ONLY BE SHIPPED BY ROAD COURIER, PLEASE SEE OUR SHIPPING PAGE FOR THE COUNTRIES THIS COVERS.*** 

Warranty Exclusion: Please note that as batteries are "consumables" we only provide dead on arrival warranty. The maximum capacity of all rechargeable batteries fades with time depending on application and usage patterns. This is considered normal - therefore, a change in battery capacity is not covered under warranty. Battery life is not warranted and will vary depending on usage.

IMPORTANT: Never charge batteries unattended or near anything flammable! Constant supervision is required as batteries can be dangerous when mishandled. Please take LiPo battery safety seriously, please see our safety sheet