Overview:
The KD Drones KD35 is a 3.5" cinewhoop for a more powerful and stronger build than the 3". This frame has the props closer together and overlapping the electronics, which creates a smaller footprint, while still allowing clean exit airflow. It's a compact, stiff frame with fantastic performance and lower moment of inertia compared to traditional designs. It also features a mounted XT60 and the ability to mount an action camera on the front AND the rear.
Specifications:
- Weight: 155g
- Size: 199 x 204 x 40 mm
Mounting:
30.5 x 30.5 and 20 x 20 ESC/FC stack, 20 x 20 and 25.5 x 25.5 VTX, 12 x 12 M2 and 16 x 16 M3 Motor pattern
Frame kit includes:
- T700 Carbon: 1x top plate, 1x bottom plate, 8x motor spacers
- Hardware
- Motor screws
- FC/ESC screws and nuts
- 3D Prints
- Mounted XT60
- Battery strap
- STLs and a Betaflight 4.4 tune can be downloaded for free from the KD35 GrabCAD page. The tune is used at your own risk and will not be suitable for all builds.
Recommended Parts (not included):
- 2207 2400kv motors
- HQ D90 3 blade or 5 blade
- Any 20 x 20 or 30 x 30 40A+ ESC and FC
- 6s 1300-1500 mAh Lipo
- Any VTX, almost all should fit
Includes:
1x KD Drones KD35 3.5" Cinewhoop Frame
