KD Drones KD50 S 5" Cinelifter Frame

Overview:
The KD Drones KD50 S is a 5" cinelifter designed to carry a Blackmagic Micro 4KG2, Naked BM, or GoPro. It has a unique design where the props overlap to create an incredibly small 24cm/9in wide True X frame. No other cinelifter has this feature, and it allows for a lighter frame with a lower moment of inertia which increases performance.

KD50 has KDCM Lite/KDCM/DAC camera mount holes at the front, and also naked BM mounting holes, and GoPro mounts front and back. It's a compact, stiff frame with fantastic performance and packs a serious punch in a tiny form factor.

Specifications:
- Weight: 209g
- Size: 245 x 240 x 50 mm

Mounting:
- KDCM Lite/KDCM/DAC camera mount (30.5 x 30.5 M3 and 61 x 50.8 mm M4 holes with press nuts)
- Naked BM M3 mounting holes (90 x 124 mm)
- 20 x 20, 25.5 x 25.5, 30.5 x 30.5 for FC/ESC and VTX
- 16 x 16 and 19 x 19 Motor pattern

Frame kit includes:
- T700 Carbon: 1x top plate, 1x bottom plate, 10x motor spacers
- Hardware
- Motor screws
- FC/ESC screws and nuts
- 3D Prints
- Mounted XT60
- 1x battery strap
- STLs and a Betaflight 4.4 tune can be downloaded for free from the KD50 S GrabCAD page. The tune is used at your own risk and will not be suitable for all builds.

Recommended Parts (not included):
- KDCM Lite camera mount
- Matek 12S Pro BEC for camera power
- 2806.5 1700kv Xnova motors
- iFlight F5 tri blade props
- Hobbywing 60/65A or Foxeer Reaper 65A ESC and any FC with a good gyro
- 6s 2000 mAh Lipo
- Any XTV you like will fit, and there are SMA mounts at the side for antennas (for ufl to SMA extensions use 20cm)

Includes:
1x KD Drones KD50 S 5" Cinelifter Frame