Overview:
The Matek mLRS 900MHz (868MHz / 915MHz) TX is a JR compatible TX module for the mLRS system. mLRS is similar to ELRS but focussed more on telemetry. It uses the same long range LoRa technology and CRSF protocol.
This module operates on the 900MHz band (868MHz EU / 915MHz FCC) and includes a 5V fan. The JR Case design is provided on the Matek website for 3D printing and is not included.
** To comply with EU/UK laws you must run this module in 868MHz mode **
Specifications:
mR900-30
- STM32G431KB, mLRS firmware
- LoRa SX1262 with TCXO
- PA/LNA SKY68383-11
- RF Frequency: 900MHz (868MHz, 915MHz FCC)
- 915MHz RF power: 21dBm(min) / 22dBm / 24dBm / 27dBm / 30dBm(1000mW)
- 868MHz RF power: 24dBm(min) / 24dBm / 24dBm / 27dBm / 30dBm(1000mW)
- Antenna connector: IPEX MHF-1 to SMA
mRx-Tx Adapter
- Built-in HC-04 Bluetooth module
- Built-in 5V fan controller, running if ourput power>=500mW
- TX2: RC IN(CRSF)
- one buttom for DFU mode and Bind
- Red and Green LED for mLRS status
- Blue LED for bluetooth status
- Power supply: 5-13V DC @ JR_PIN3 (VIN)
Packing:
- 1x mR900-30-TX
- 1x IPEX MHF1 to SMA adapter cable 5cm
- 1x IPEX MHF1 to RP-SMA adapter cable 5cm
- 1x 5V Fan (25*25*10mm) and some screws
- no SMA antenna & 3D printed Case packed
Includes:
- 1x Matek mLRS 900MHz TX Module Kit
