NewBeeDrone AcroBee75 BLV3 BNF

The NewBeeDrone AcroBee75 is lighter, faster and strong - the ultimate tiny whoop BNF. The AcroBee75 is more suitable for outdoor flight, being a tiny bit larger than the AcroBee65. The AcroBee includes an BLV3 AIO board, 4in1 ESC with built in VTX and FrSky SPI diversity receiver. All this in a whoop that weighs only 23 grams (without battery). With the same KV motor and same 300mah battery, the flight time is very similar to that of the AcroBee65.

Receiver Improvements - 50% More Range
Optimized SPI Receiver hardware to improve efficiency within the receiver

Removable antennas
Additional low-noise amplifier to increase range
Optional wiring harness is available to install an external receiver (Crossfire, Ghost, etc.)

Video Transmitter Improvements - 120mW
New heatsink and layout to increase heat dispersion and efficiency
Increased transmitting power from 25mW to 120mW (V2)

Specifications:
- Flight Controller: NewBeeDrone BeeBrain Brushless V3 AIO
- Motors: NewBeeDrone 0802 18000kv Brushless Motors - Gold Edition (Unibell Version)
- Propellers: NewBeeDrone Azi (Tri Blade) Micro Props - 40mm,1.0mm Shaft
- Receiver: Integrated True Diversity SPI Receiver with LNA+PA, FrSky compatible (optional external receiver compatible)
- Receiver Antenna: MHF3 2.4GHz Antenna
- VTX: Onboard, up to 120mW
- VTX Antenna
- FPV Camera: NewBeeDrone BeeEye FPV Camera
- Weight without Battery: 23 grams
- UART2 TX and RX free for external receiver (un-inverted SBus signal only)

Note: The default power mode is low (5mW). Set the power level to medium (50mW) before flying.

** Requires Batteries (see related items) and an FrSky D8 compatible transmitter **

Includes:
1x AcroBee75 BLV3 BNF