Sequre SI012 Intelligent Soldering Iron With D24 Tip

Description:

The Sequre SI012  intelligent soldering is a compact digital soldering iron, powered by compatible USB port or DC jack. The power rating is upto 68W depending on the top used and input voltage. The SI012 includes an OLED display used to display parameters such as temperature, battery voltage and working mode. 

The soldering iron is compatible with both TS and T12 soldering iron tips (T12 tips require the iron to be adjusted before use).

We have also included the D24 tip which we believe is the best choice. Its a wedge style tip which gives you enough surface area to deal with tougher to solder situations like the main positive and negative pads with large connected surface areas.

Specifications:

- Suitable for both long and short soldering iron tips, the maximum temperature is 450C/842F.
- Working power supply: support PD3.0, DC12V-25V, 3S-6S battery.
- 0.91 inch OLED display, the brightness display can be adjusted.
- Built-in buzzer to remind, automatically heat up when power on, turn it on or off as you like.
- Intelligent temperature control algorithm, supports temperature compensation and temperature self-calibration.
- The shell is made of transparent high temperature resistant fireproof PC environmental protection material.
- The sensitivity can be set to reject the interference of environmental factors.
- Support C/F switching, left and right-hand screen flip.
- Low voltage protection, high temperature and high voltage alarm, safe and reliable.
- User upgradeable firmware via USB port

Includes:
- 1 x Sequre SI012 + TS-D24 Tip
- Accessories (Stand, screwdriver etc)

IMPORTANT SAFETY CONSIDERATIONS:

1. Please use ground clamp, proper power supply and other accessories to ensure safe use.          
2. When the SI012 is used for the first time, it may slightly smoke due to heating of the electric heating element, which is normal.
3. If SI012 is used continuously for more than 350 ° C for 40 minutes, the handle temperature of soldering iron will reach 50°C~60°C.
4. When heated DO NOT touch the iron tip, always wear proper protection to prevent burns.        
5. When SI012 has been powered on, do not attempt to remove the tip until the iron has fully cooled.