Overview:
The SpeedyBee F405 Mini Flight controller is an excellent value beginners flight controller that supports the SpeedyBee phone app to configure your quad on the go via Bluetooth.
The FC includes support for DJI Air Units via the onboard 9V 2A BEC. 6 Uarts are included which allows accessories like LEDs and GPS to be connected. 8Mbit blackbox logging is included along with an innovative 4x LED system on the side of the board provides basic "Lipo Checker" functionality giving a percentage indication of current battery capacity.
F405 FC Specifications:
- MCU: STM32F405
- IMU(Gyro): ICM42688P
- USB Port Type: Type-C
- Barometer: Built-in
- OSD Chip: AT7456E chip
- BLE Bluetooth: Supported.
- Wireless FC Firmware Flashing & Blackbox: NOT Supported.
- WIFI: Not supported
- DJI Air Unit Connection Way: Direct soldering
- DJI Air Unit Compatibility: DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1.
- Blackbox: 8MB Onboard Flash
- BetaFlight Camera Control Pad: Yes(CC pad on the front side)
- Current Sensor Input: Supported.
- Power Input: 3-6S LiPo. The flight controller is powered through the G, V wires of the 8pin harness or G, V pads from the bottom side of the flight controller.
- 5V Output: 2A
- 9V Output: 3A.
- 3.3V Output: 500mA
- 4.5V Output: 1A
- UART 6 sets(UART1, UART2, UART3, UART4(Dedicated for Bluetooth connection)), UART5(Dedicated for ESC telemetry),UART6
- ESC Telemetry: UART R5(UART5)
- I2C: Supported
- Traditional Betaflight LED Pad: Supported
- Buzzer: Supported
- Smart Port / F.Port: Not Supported
- Mounting: 20 x 20mm 3.5mm hole diameter ，Compatible with M2 and M3 screws/Silicone grommets.
- Dimension: 30(L) x 32(W) x 7.8(H)mm
- Weight: 9.6g
Includes:
1xSpeedyBee F405 Mini Flight Controller (20mm)
Accessories
