Overview:
The SpeedyBee Master 5 V2 series is designed for FPV freestyle flying and features Deadcat geometry. The master 5 features an innovative anti-shock fixed stack structure which help mitigate noise getting through to the gyro. The arms have a quick release mechanism to help speed up installation and repairs. The frame has been designed with a horizontal field of view of around 130 degrees. The camera plate is detachable. The V2 Frame is compatible with the DJI O3 air unit as well as other video systems - HDZero, Analogue or Walksnail due to its smart camera side plate design. The V2 frame also includes a high power VTX heat sink, ideal for enchanging the DJI O3 Air Units ability to passively cool.
Features:
- Optimized DC structure(almost identical to Wide X) for effortless freestyle maneuvers. DJI O3 compatibility without needing coaxial cable replacement.
- The camera mounting is changed to TPU mode, and the resilience of TPU allows compatibility with 20mm/19mm cameras.
- No propellers in FPV view or HD recordings when using DJI O3, Link or Analog Camera.
- Video transmitter mounting positions at the rear end in the following sizes: 30.5*30.5mm, 25.5*25.5mm, and 20*20mm. Improved heat dissipation with a honeycomb-shaped CNC heatsink for O3 or analog VTX.
- Enhanced strength with CNC 7075 aluminum front side plates with O3 ND filter compatibility.
- Vibration-damping structure to filter vibrations and protect the flight stack.
- Programmable RGB LEDs embedded under the flight stack for customizable visual effects.
- Added side flight stack protective plate and embedded RGB LED strips.
- The newly designed antenna mount supports GPS antennas of various sizes, such as 121mm, 181mm, 220mm, 251mm, and 880mm (requires replacing the universal base of the small mount on top).
- To make installation more convenient, TPU mounts for receiver, buzzer, and capacitor are added. Cable management sleeves are included. Additionally, a buzzer is now included as a standard factory accessory.
- The standard configuration includes a TPU camera mount, SMA antenna mount, bottom protective rubber, and an HD antenna mount that supports O3/LINK/dual 3mm antennas.
** This is the Master 5 V2 frame which is suitable for both analogue and digital VTX, props may be visible in certain configurations with this version. **
Specifications:
- Model: SpeedyBee Master 5 V2 Frame
- Weight: ~140g
- Top & Bottom Plate thickness: 2.5mm
- Arm thickness: 5mm
- Camera width: supports 19-20mm width
- 3D printed TPU Parts: Yellow
- Suitable prop size: 5", 5.1"
- FC mounting holes: 30.5x30.5mm and 20x20mm (M3)
- VTX mounting holes: 30.5x30.5mm, 25.5mmx25.5mm and 20x20mm (M3)
Includes:
- SpeedyBee Master 5 V2 Frame
- Accessories (inc 3D parts)
