ToolkitRC M6 Multifunction Charger

Overview:

The ToolkitRC M6 is a compact, portable multifunction DC battery charger. The M6 is touch operated and includes a small 1.8" LCD panel. The maximum charger power is 150W when powered by a suitable DC input. The charger also includes a host of additional features included signal measurer for PWM, PPM SBUS, Voltage and battery IR. The M6 can also act as a signal generator outputting PWM, PPM and SBUS signals. Finally the ToolkitRC M6 can also act as an adjustable bench power supply that can operate in both constant current and constant voltage modes. 

Specifications (General):

- Product Size: 70x50x26 mm
- Product Weight: 80g
- LCD: TFT 1.8inch LCD 160x128 pixel

Specifications (Charger):

- Input voltage: 7.0-28.0V MAX 12A
- Battery type: (Lipo LiHV LiFe) 1-6S / (NiMh) 1-16S (Pb) 1-10S
- Balance current: 400mA 2-6S
- Charging power: 150W MAX 10A
- Discharge power: 150W MAX 10A Recycle / 8W 2A (Normal mode)
- USB: 2.1A  5.0V

Specifications (Measurer):

- PWM: 880-2200us @ 20-400Hz
- PPM: 880-2200us x8CH @ 20-50Hz
- SBUS: 880-2200us x16CH @ 20-100Hz
- Voltage: 1.0-5.0V @ 1-6S
- Internal Resistance: 10-100mR @ 1-6S

Specifications (Output):
- PWM: 500-2500us @ 20-1000Hz
- PPM: 880-2200us * 8CH @ 20-50Hz
- SBUS: 880-2200us * 16CH @ 20-100Hz
- Power Supply:1.0-28.0V @1.0-10A mode:CC CV
- Overcurrent Response: 50ms

Included:

- ToolkitRC M6 Multifunction Charger 

IMPORTANT: Never charge batteries unattended! Constant supervision is required as batteries can be dangerous when mishandled. We recommend charging your batteries inside a protective charging bag.