VIFLY Finder 2 Lost Model Battery Buzzer

Overview:

The newly enhanced V2 VIFLY Finder features enhancements for quad & RC aircraft pilots. The VIFLY V2 features an ultra bright LED  and light sensor for intelligent power saving. In addition the Finder now supports PWM signals so its not just restricted to flight controllers, it can now be used by simpler setups.

These are the new improved V2.1+. The latest versions allows the battery to remain uncharged without top up for upto 6 months and features a longer working time and louder volume.

The VIFLY lost model finder is a loud (~100dB) buzzer with battery backup to ensure if you crash and your battery is ejected that you can still find your model.  The VIFLY Finder is wired into your quad or plane via a 5V connection, this 5V connection charges the onboard LIPO battery. If you connect it to a board with a buzzer output then the VIFLY finder will act as a normal buzzer, just much louder. Upon landing (or after a crash) the main power will disconnect and the finder will enter a pre-alarm, low volume mode for 30 seconds followed by upto 30 hours of full volume beeping to help you locate your model. You can disarm the finder by holding down the button on the side for 5 seconds.

Specifications:

- 23x13x16mm
- Weight ~ 5 grams
- Volume: upto 105dB
- Working Time: upto 30 hours
- Charge Time 1.5 hours

Includes:

1x VIFLY V2+ finder buzzer
1x Cable
1x Tie Wrap

Warranty Exclusion: Please note that as batteries are "consumables" we only provide dead on arrival warranty. The maximum capacity of all rechargeable batteries fades with time depending on application and usage patterns. This is considered normal - therefore, a change in battery capacity is not covered under warranty. Battery life is not warranted and will vary depending on usage.

Battery Safety: Please take LiPo battery safety seriously, please see our safety sheet.