Walksnail Avatar HD V2 Micro Kit (32GB)

Overview:

The Walksnail Avatar HD V2 micro Kit includes a Avatar V2 32GB VTX module, one antennas and an Avatar micro V2 camera. The system is capable of transmitting at 1080P/120FPS (and more) with an average latency of 22ms in high frame rate mode. The included camera has a 4K 2.7" sensor and measures 19x19x22mm (micro size). The Avatar VTX is a single board design weighing only 18g, with 25.5x25.5 & 20x20mm mounting holes. The Avatar HD system supports BetaFlight canvas mode for OSD. The Avatar system has an average of 22ms latency in high frame rate mode. The VTX includes on board 32GB storage allowing it to record 1080p or 720p flight videos without interference.

This version is the 32GB kit and supports gyroflow.

Compatible with the Walksnail HD goggles or Fat Shark Dominator Avatar HD Goggles.

Features:
- Input Voltage: 6V-25.5V
- 20mmx20mm mounting holes added
- Updated PCB and outer shell
- Onboard 32GB Storage
- Supports Gyroflow
- Supports Canvas Mode
- 4K pixel, 120fps, 4:3 native sensor
- 1080P HD FPV
- F/2.0 Large Aperture
- 160° wide-angle FOV

Avatar Micro Camera Specifications
- Model    Avatar V2 camera
- Image Sensor    1/3.2-Inch 4MP 4:3sensor
- Resolution    1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility; 
- Ratio    4:3 native /16:9
- Lens    2.1mm
- FOV    160°
- Aperture    F2.0
- Shutter    Rolling shutter
- Min.Illumination    0.001Lux
- Weight    7.2g
- Dimensions    19*19*22mm
- Coaxial Cable    140mm
- Gyroflow   supported

Avatar V2 VTX (32GB) Specifications
- Model    Avatar V2 module
- Communication Frequency    5.725-5.850GHz
- Transmitter Power (EIRP)    FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;
- MIC:<25dBm
- 1/O Interface    JST1.0*4(Power in)JST0.8*6(USB)
- Mounting Holes    25.5*25.5mm; 20*20mm
- Dimensions    33.5*33.5*10.5mm
- Storage    32GB Model (Gyro Flow Supported)
- Recording    1080p/720p
- Weight    17.6g
- Operating Temperature    -20-40℃
- Channels    8
- Wide Power Input    6V-25.2V
- Supported FC System    Betaflight; Inav; Fettec; ArduPilot; Kiss
- OSD    Canvas mode
- Latency    Average delay 22ms
- Antenna    1(IPEX)

Avatar V2 Antenna Specifications    
- Polarization    LHCP
- Bandwidth    5600MHz-6000MHz
- Gain    1.9dBi
- VSWR    ≤1.5
- Input Impedance    50Ω
- Interface    IPEX-1
- Size    R15 X 45mm （without cable）
- Weight    2g

Included:
- 1x Avatar HD V2 Micro Kit (32GB VTX, Micro V2 Camera, Antenna)
- Accessories (Wires, screws etc)